Cloud Execution for Desktop in Azure
Follow this guide to deploy the Cloud Execution for Desktop (CEfD) module for Azure private data processing.
Prerequisite
Before you deploy the CEfD module, you must complete these steps on the Set Up Azure Subscription and Vnet for Private Data page...
Configured a resource group dedicated to Alteryx Analytics Cloud (AAC) as mentioned in the Create Resource Group section.
Configured a Vnet dedicated to AACAAC as mentioned in the Configure Virtual Private Network section.
App registration and base IAM policy attached to the service account as mentioned in the Configure IAM section.
Successfully triggered private data processing provisioning as mentioned in the Trigger Private Data Handling Provisioning section.
Subscription Setup
Step 1: Configure IAM
Step 1a: Create IAM Custom Role
You need to create a custom IAM role. Name it AAC_CEFD_SA_Role and use the following role document. We recommend using the JSON tab instead of the visual editor. AACAAC requires some * permissions to run. Expect some security warnings when you create the role.
Nota
AAC_CEFD_SA_Role is an example role name. You can choose any name for the role, but the name must start with AAC_CEFD.
Importante
You must update the "assignableScopes" scope of this custom role. Replace <subscription ID> with your subscription ID.
{
"properties": {
"roleName": "AAC_CEFD_SA_Role",
"description": "Custom role for provisioning AAC private data handling",
"assignableScopes": [
"/subscriptions/<subscription ID>"
],
"permissions": [
{
"actions": [
"Microsoft.Authorization/*/read",
"Microsoft.Compute/availabilitySets/*",
"Microsoft.Compute/locations/*",
"Microsoft.Compute/virtualMachines/*",
"Microsoft.Compute/virtualMachineScaleSets/*",
"Microsoft.Compute/cloudServices/*",
"Microsoft.Compute/disks/write",
"Microsoft.Compute/disks/read",
"Microsoft.Compute/disks/delete",
"Microsoft.Network/applicationGateways/backendAddressPools/join/action",
"Microsoft.Network/loadBalancers/backendAddressPools/join/action",
"Microsoft.Network/loadBalancers/inboundNatPools/join/action",
"Microsoft.Network/loadBalancers/inboundNatRules/join/action",
"Microsoft.Network/loadBalancers/probes/join/action",
"Microsoft.Network/loadBalancers/read",
"Microsoft.Network/locations/*",
"Microsoft.Network/networkInterfaces/*",
"Microsoft.Network/networkSecurityGroups/join/action",
"Microsoft.Network/networkSecurityGroups/read",
"Microsoft.Network/networkSecurityGroups/write",
"Microsoft.Network/networkSecurityGroups/delete",
"Microsoft.Network/publicIPAddresses/join/action",
"Microsoft.Network/publicIPAddresses/read",
"Microsoft.Network/virtualNetworks/read",
"Microsoft.Network/virtualNetworks/subnets/join/action",
"Microsoft.RecoveryServices/locations/*",
"Microsoft.ResourceHealth/availabilityStatuses/read",
"Microsoft.Resources/deployments/*",
"Microsoft.Resources/subscriptions/resourceGroups/read",
"Microsoft.Resources/subscriptions/read",
"Microsoft.Resources/subscriptions/operationresults/read",
"Microsoft.KeyVault/*",
"Microsoft.Network/virtualNetworks/subnets/read",
"Microsoft.ManagedIdentity/userAssignedIdentities/read",
"Microsoft.ManagedIdentity/userAssignedIdentities/assign/action",
"Microsoft.Network/routeTables/routes/write",
"Microsoft.Network/routeTables/routes/read",
"Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/read",
"Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/write",
"Microsoft.ManagedIdentity/userAssignedIdentities/federatedIdentityCredentials/delete",
"Microsoft.ManagedIdentity/userAssignedIdentities/delete",
"Microsoft.ManagedIdentity/userAssignedIdentities/write",
"Microsoft.Network/routeTables/read",
"Microsoft.Network/routeTables/write",
"Microsoft.Authorization/roleAssignments/write",
"Microsoft.Authorization/roleAssignments/delete",
"Microsoft.Insights/autoScaleSettings/write",
"Microsoft.Insights/autoScaleSettings/read",
"Microsoft.Insights/autoScaleSettings/delete"
],
"notActions": [],
"dataActions": [],
"notDataActions": []
}
]
}
}Step 1b: Bind Custom Role to App Registration in the Subscription
Add the AAC_CEFD_SA_Role IAM custom role to the aac_automation_sa service account created on the Set Up Azure Subscription and Vnet for Private Data page.
Step 2: Route Table
Create the route table for your subnets.
Importante
You must configure the Vnet with a network connection to the internet in your subscription.
Nota
This route table is an example.
Address Prefix | Next Hop Type |
|---|---|
/22 CIDR Block | v-net |
0.0.0.0/0 | <gateway_ID> |
Nota
Your <gateway id> can be either a NAT gateway created per AZ or a transit gateway, depending on your network architecture.
Step 3: Configure Subnet
CEfD in the private data processing requires 1 subnet.
aac_option: Use this group if you enable Cloud Execution for Desktop within your private data processing. If you enable this option, an AMI swarm runs in this subnet to handle Designer Desktop processing jobs that run in the cloud.
Step 3a: Create Subnet in the Vnet
Configure subnets in the aac_vpc VPC.
Follow this example to create subnets with subnet name, subnet size, and other configurations (modify values, as needed, to meet your network architecture). Attach the Network security group created on the Set Up Azure Subscription and Vnet for Private Data page to the subnets.
Address Space | Subnet Name | Subnet | Service Endpoints | Route Table | Notes |
|---|---|---|---|---|---|
10.10.0.0/22 | aac_option | 10.10.0.0/23 | Microsoft.Storage Microsoft.KeyVault | Attach to the route table created in Step 2. |
Importante
10.10.0.0/22 is an example. The subnet name must match with the name as shown in the table.
Step 4: Quota Adjustment
Adjust quotas per these parameters:
CPU Limits
Quota Name: Total Regional vCPUs
Scope: Regional
Azure default quota value: 10
Applied quota value: 2500
Quota Name: Standard Basv2 Family vCPUs
Scope: Regional
Azure default quota value: 10
Applied quota value: 2500
Private Data Processing
Attenzione
Se modifichi o rimuovi qualsiasi risorsa del cloud pubblico fornita da AAC dopo l'attivazione della gestione dei dati privati, si verifica uno stato di non coerenza. Questa incoerenza genera errori durante l'esecuzione del processo o il deprovisioning della configurazione di gestione del piano dati privato.
Step 1: Trigger CEfD Deployment
CEfD provisioning triggers from the Admin Console inside AACAAC. You need Workspace Admin privileges within a workspace in order to see it.
From the AACAAC landing page, select the Profile menu and then select Workspace Admin.
From the Admin Console, select Private Data Handling and then select Processing.
Select the Cloud Execution for Desktop checkbox and then select Update.
Selecting Update triggers the deployment of the cluster and resources in the Azure subscription. This runs a set of validation checks to verify the correct configuration of the Azure subscription.
Nota
The provisioning process takes approximately 35–40 minutes to complete.
After the provisioning completes, you can view the created resources (for example, VM instances and node pools) through the Azure portal. It is very important that you don't modify them on your own. Manual changes might cause issues with the function of the private data processing.