Page tree

 

Contents:


The following changes have been applied to Wrangle in this release of Trifacta® Wrangler Enterprise.

Release 7.1

New Functions

This release introduces the following functions to calculate the difference between two valid dates.

Date calculation functions:

Function NameDescription
MINDATE Function

Computes the minimum value found in all row values in a Datetime column.

MAXDATE Function

Computes the maximum value found in all row values in a Datetime column.

MODEDATE Function

Computes the most frequent (mode) value found in all row values in a Datetime column.

Work day functions:

Function NameDescription
NETWORKDAYS Function

Calculates the number of working days between two specified dates, assuming Monday - Friday workweek. Optional list of holidays can be specified.

NETWORKDAYSINTL Function

Calculates the number of working days between two specified dates. Optionally, you can specify which days of the week are working days as an input parameter. Optional list of holidays can be specified.

WORKDAY Function

Calculates the work date that is before or after a start date, as specified by a number of days. A set of holiday dates can be optionally specified.

WORKDAYINTL Function

Calculates the work date that is before or after a start date, as specified by a number of days. You can also specify which days of the week are working days and a list of holidays via parameters.

Time zone conversion functions:

Function NameDescription
CONVERTFROMUTC Function

Converts Datetime value to corresponding value of the specified time zone. Input can be a column of Datetime values, a literal Datetime value, or a function returning Datetime values.

CONVERTTOUTC Function

Converts Datetime value in specified time zone to corresponding value in UTC time zone. Input can be a column of Datetime values, a literal Datetime value, or a function returning Datetime values.

CONVERTTIMEZONE Function

Converts Datetime value in specified time zone to corresponding value second specified time zone. Input can be a column of Datetime values, a literal Datetime value, or a function returning Datetime values.

Release 6.11

New Functions

This release introduces the following functions to evaluate String values against individual data types.

Function NameDescription
PARSEBOOL Function

Evaluates a String input against the Boolean datatype. If the input matches, the function outputs a Boolean value. Input can be a literal, a column of values, or a function returning String values.

PARSEFLOAT Function

Evaluates a String input against the Decimal datatype. If the input matches, the function outputs a Decimal value. Input can be a literal, a column of values, or a function returning String values.

PARSEINT Function

Evaluates a String input against the Integer datatype. If the input matches, the function outputs an Integer value. Input can be a literal, a column of values, or a function returning String values.

PARSEDATE function now supports four default Datetime format values

Prior to Release 6.11, the PARSEDATE function required that you submit an array of Datetime formats as the second parameter of the function. 

In Release 6.11, the PARSEDATE function supports the following default Datetime values:

'yyyy-MM-dd HH:mm:ss' 
'yyyy/MM/dd HH:mm:ss' 
'yyyy-MM-dd' 
'yyyy/MM/dd'


NOTE: These defaults are used only if the function reference does not contain a second parameter of an array of valid Datetime formats.

For more information, see PARSEDATE Function.

ignore case parameter added to string functions

In Release 6.11, the following functions now support an ignore case parameter. It is not required, and the default value is false. By default, matches are case-sensitive.

Expanded parameters for SUBSTITUTE function

In Release 6.11, the accepted parameter inputs have been expanded. 

Parameter Namepre-Release 6.11 inputsRelease 6.11 or later inputsNotes
string_sourceString literal, column, or function returning String valuesNo change
string_pattern

String literal, pattern, or regex

String literal, pattern, or regex or a column or function returning String values


string_replacement

String literal

String literal or a column or function returning String values


ignore_casen/aIf true, matching is case-insensitive. Default is false.New parameter
pattern_before

String literal, pattern, or regex

No change

Not permitted when string_pattern or string_replacement is of column data type.

pattern_afterString literal, pattern, or regexNo change

Not permitted when string_pattern or string_replacement is of column data type.

For more information, see SUBSTITUTE Function.

Release 6.9

MODE functions return lowest value in evaluated set if there is a tie

Suppose you have the following set of values:

PriceQuantity
5.233
37
7.883
-3.12-1
06
5.230
8.3738

You apply the following transformation:

Transformation Name New formula
Parameter: Formula type Single row formula
Parameter: Formula MODEIF(Quantity, Price < 5)
Parameter: New column name 'modeif-test'

For the rows where price < 5, there is no most commonly occurring value in Quantity.

In Release 6.8 and earlier, the returned value was null.

In Release 6.9 and later, the returned value is the lowest value among the evaluated set. Among the qualifying rows, the lowest value in the Quantity column is -1.

New Functions

This release introduces the following statistical functions.

Function NameDescription
MEDIAN Function

Computes the median from all row values in a column or group. Input column can be of Integer or Decimal.

PERCENTILE Function

Computes a specified percentile across all row values in a column or group. Input column can be of Integer or Decimal.

QUARTILE Function

Computes a specified quartile across all row values in a column or group. Input column can be of Integer or Decimal.

CORREL Function

Computes the correlation coefficient between two columns. Source values can be of Integer or Decimal type.

COVAR Function

Computes the covariance between two columns using the population method. Source values can be of Integer or Decimal type.

COVARSAMP Function

Computes the covariance between two columns using the sample method. Source values can be of Integer or Decimal type.

Release 6.8

New Functions

This release introduces the sampling method of calculating statistical functions. The following are now available:

Function NameDescription
STDEVSAMP Function

Computes the standard deviation across column values of Integer or Decimal type using the sample statistical method.

VARSAMP Function

Computes the variance among all values in a column using the sample statistical method. Input column can be of Integer or Decimal. If no numeric values are detected in the input column, the function returns 0

STDEVSAMPIF Function

Generates the standard deviation of values by group in a column that meet a specific condition using the sample statistical method.

VARSAMPIF Function

Generates the variance of values by group in a column that meet a specific condition using the sample statistical method.

ROLLINGSTDEVSAMP Function

Computes the rolling standard deviation of values forward or backward of the current row within the specified column using the sample statistical method.

ROLLINGVARSAMP Function

Computes the rolling variance of values forward or backward of the current row within the specified column using the sample statistical method.


Release 6.6

New Functions

Function NameDescription
SINH Function

Computes the hyperbolic sine of an input value for a hyperbolic angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

COSH Function

Computes the hyperbolic cosine of an input value for a hyperbolic angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

TANH Function

Computes the hyperbolic tangent of an input value for a hyperbolic angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

ASINH Function

Computes the arcsine of an input value for a hyperbolic angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

ACOSH Function

Computes the arccosine of an input value for a hyperbolic angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

ATANH Function

Computes the arctangent of an input value for a hyperbolic angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.


Release 6.5

New Functions

Function NameDescription
SIN Function

Computes the sine of an input value for an angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

COS Function

Computes the cosine of an input value for an angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

TAN Function

Computes the tangent of an input value for an angle measured in radians. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

Cotangent FunctionSee TAN Function.
Secant FunctionSee COS Function.
Cosecant FunctionSee SIN Function.
ASIN Function

For input values between -1 and 1 inclusive, this function returns the angle in radians whose sine value is the input. This function is the inverse of the sine function. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

ACOS Function

For input values between -1 and 1 inclusive, this function returns the angle in radians whose cosine value is the input. This function is the inverse of the cosine function. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

ATAN Function

For input values between -1 and 1 inclusive, this function returns the angle in radians whose tangent value is the input. This function is the inverse of the tangent function. The value can be a Decimal or Integer literal or a reference to a column containing numeric values.

Arccotangent FunctionSee ATAN Function.
Arcsecant FunctionSee ACOS Function.
Arccosecant FunctionSee ASIN Function.


Release 6.4

Improvements to metadata references

Broader support for metadata references: For Excel files, $filepath references now return the location of the source Excel file. Sheet names are appended to the end of the reference. See Source Metadata References.

Release 6.3

New Functions

Function NameDescription
PARSEDATE Function

Evaluates an input against the default input formats or (if specified) an array of Datetime format strings in their listed order. If the input matches one of the formats, the function outputs a Datetime value.

Optional input formats for DateFormat task

The DateFormat task now supports a new parameter: Input Formats. This parameter specifies the date format to use when attempting to parse the input column.

  • If the parameter is specified, then the value of the parameter is used to parse the inputs. 
  • (default) if the parameter is not specified, then the following common formats are used for parsing the input:

    'M/d/yy',
    'MM/dd/yy',
    'MM-dd-yy',
    'M-d-yy',
    'MMM d, yyyy',
    'MMMM d, yyyy',
    'EEEE, MMMM d, yyyy',
    'MMM d yyyy',
    'MMMM d yyyy',
    'MM-dd-yyyy',
    'M-d-yyyy',
    'yyyy-MM-ddXXX',
    'dd/MM/yyyy',
    'd/M/yyyy',
    'MM/dd/yyyy',
    'M/d/yyyy',
    'yyyy/M/d',
    'M/d/yy h:mm a',
    'MM/dd/yy h:mm a',
    'MM-dd-yy h:mm a',
    'MMM dd yyyy HH.MM.SS xxx',
    'M-d-yy h:mm a',
    'MMM d, yyyy h:mm:ss a',
    'EEEE, MMMM d, yyyy h:mm:ss a X',
    'EEE MMM dd HH:mm:ss X yyyy',
    'EEE, d MMM yyyy HH:mm:ss X',
    'd MMM yyyy HH:mm:ss X',
    'MM-dd-yyyy h:mm:ss a',
    'M-d-yyyy h:mm:ss a',
    'yyyy-MM-dd h:mm:ss a',
    'yyyy-M-d h:mm:ss a',
    'yyyy-MM-dd HH:mm:ss.S',
    'dd/MM/yyyy h:mm:ss a',
    'd/M/yyyy h:mm:ss a',
    'MM/dd/yyyy h:mm:ss a',
    'M/d/yyyy h:mm:ss a',
    'MM/dd/yy h:mm:ss a',
    'MM/dd/yy H:mm:ss',
    'M/d/yy H:mm:ss',
    'dd/MM/yyyy h:mm a',
    'd/M/yyyy h:mm a',
    'MM/dd/yyyy h:mm a',
    'M/d/yyyy h:mm a',
    'MM-dd-yy h:mm:ss a',
    'M-d-yy h:mm:ss a',
    'MM-dd-yyyy h:mm a',
    'M-d-yyyy h:mm a',
    'yyyy-MM-dd h:mm a',
    'yyyy-M-d h:mm a',
    'MMM.dd.yyyy',
    'd/MMM/yyyy H:mm:ss X',
    'dd/MMM/yy h:mm a',

    These formats are a subset of the date formatting strings supported by the product. For more information, see Datetime Data Type.

Release 6.2

New Functions

Function NameDescription
RANK Function

Computes the rank of an ordered set of value within groups. Tie values are assigned the same rank, and the next ranking is incremented by the number of tie values.

DENSERANK Function

Computes the rank of an ordered set of value within groups. Tie values are assigned the same rank, and the next ranking is incremented by 1.

ARRAYELEMENTAT function accepts new inputs

In previous releases, the ARRAYELEMENTAT function accepted a second input parameter to specify the index value of the element to retrieve. This "at" parameter had to be an Integer literal.

Beginning in this release, the function also accepts for this second "at" parameter:

  • Names of columns containing Integer values
  • Functions that return Integer values

For more information, see ARRAYELEMENTAT Function.

Release 6.1

None.

Release 6.0

New Functions

Function NameDescription
ARRAYINDEXOF Function

Computes the index at which a specified element is first found within an array. Indexing is left to right.

ARRAYRIGHTINDEXOF Function

Computes the index at which a specified element is first found within an array, when searching right to left. Returned value is based on left-to-right indexing.

ARRAYSLICE Function

Returns an array containing a slice of the input array, as determined by starting and ending index parameters.

ARRAYMERGEELEMENTS Function

Merges the elements of an array in left to right order into a string. Values are optionally delimited by a provided delimiter.

Changes to LIST* inputs

The following LIST-based functions have been changed to narrow the accepted input data types. In previous releases, any data type was accepted for input, which was not valid for most data types. 

In Release 6.0 and later, these functions accept only Array inputs. Inputs can be Array literals, a column of Arrays, or a function returning Arrays.

NOTE: You should references to these functions in your recipes.

Renamed functions

The following functions have been renamed in Release 6.0.

Release 5.9 and earlierRelease 6.0 and later
LISTUNIQUE FunctionUNIQUE Function

FILL Function has new before and after parameters

Prior to Release 6.0, the FILL function replaced empty cells with the most recent non-empty value. 

In Release 6.0, before and after function parameters have been added. These parameters define the window of rows before and after the row being tested to search for non-empty values. Within this window, the most recent non-empty value is used. 

The default values for these parameters are -1 and 0 respectively, which performs a search of an unlimited number of preceding rows for a non-empty value.

NOTE: Upon upgrade, the FILL function retains its preceding behavior, as the default values for the new parameters perform the same unlimited row search for non-empty values.

For more information, see FILL Function.

Release 5.9

New functions

The following functions can now be applied directly to arrays to derive meaningful statistics about them. 

FunctionDescription
ARRAYSORT Function

Sorts array values in the specified column, array literal, or function that returns an array in ascending or descending order.

TRANSLITERATE Function

Transliterates Asian script characters from one script form to another. The string can be specified as a column reference or a string literal.

Release 5.8

File lineage information using source metadata references

Beginning in Release 5.8, you can insert the following references into the formulas of your transformations. These source metadata references enable you to continue to track file lineage information from within your datasets as part of your wrangling project.

NOTE: These references apply only to file-based sources. Some additional limitations may apply.

referenceDescription
$filepathReturns the full path and filename of the source of the dataset.
$sourcerownumber

Returns the row number for the current row from the original source of the dataset.

NOTE: This reference is equivalent to the SOURCEROWNUMBER function, which is likely to be deprecated in a future release. You should begin using this reference in your recipes.

 For more information, see Source Metadata References.

New math and statistical functions for arrays

The following functions can now be applied directly to arrays to derive meaningful statistics about them. 

FunctionDescription
LISTSUM Function

Computes the sum of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

LISTMAX Function

Computes the maximum of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

LISTMIN Function

Computes the minimum of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

LISTAVERAGE Function

Computes the average of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

LISTVAR Function

Computes the variance of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

LISTSTDEV Function

Computes the standard deviation of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

LISTMODE Function

Computes the most common value of all numeric values found in input array. Input can be an array literal, a column of arrays, or a function returning an array. Input values must be of Integer or Decimal type.

 

Release 5.7

WEEKNUM function now behaves consistently across running environments

In Release 5.6 and earlier, the WEEKNUM function treated the first week of the year differently between the Trifacta Photon and Spark running environments:

  • Trifacta Photon week 1 of the year: The week that contains January 1.
  • Spark week 1 of the year: The week that contains at least four days in the specified year.

This issue was caused by Spark following an ISO-8601 standard and relying on the joda datetimeformatter. 

Beginning in Release 5.7, the WEEKNUM function behaves consistently for both Trifacta Photon and Spark:

  • Week 1 of the year: The week that contains January 1.

For more information, see WEEKNUM Function.

Release 5.6

URLPARAMS function returns null values

In Release 5.1 and earlier, the URLPARAMS function returned empty Objects when no answer was computed for the function. 

In Release 5.6 and later, this function returns null values in the above case.

See URLPARAMS Function.

Release 5.1

Wrangle now supports nested expressions

Beginning in Release 5.1, all Wrangle functions now supported nested expressions, which can be arithmetic calculations, column references, or other function calls.

NOTE: This feature is enabled by default, as this change does not break any steps created in previous versions of the product. It can be disabled if needed. See Miscellaneous Configuration.

NOTE: This capability represents a powerful enhancement to the language, as you can now use dynamic inputs for all functions.

The following expression is a valid transform in Wrangle. It locates the substring in myString that begins with the @ sign until the end of the string, inclusive:

derive value: substring(myString, find(myString, '@', true, 0), length(myString)

Nested arithmetic expressions:

Suppose you wanted just the value after the @ sign until the end of the string. Prior to Release 5.1, the following generated a validation error:

derive value: substring(myString, find(myString, '@', true, 0) + 1, length(myString)

In the above, the addition of +1 to the second parameter is a nested expression and was not supported. Instead, you had to use multiple steps to generate the string value. 

Beginning in Release 5.1, the above single-step transform is supported.

Nested column references:

In addition to arithmetic expressions, you can nested column references. In the following example, the previous step has been modified to replace the static +1 with a reference to a column containing the appropriate value (at_sign_offset) : 

derive value: substring(myString, find(myString, '@', true, 0) + at_sign_offset, length(myString)

Nested function references:

Now, you can combine multiple function references into a single computation. The following computes the total volume of a cube of length side and then multiplies that volume by the number of cubes (cube_count) to compute the total cube_volume

derive type: single value: MULTIPLY(POW(cube_side,3),cube_count) as: 'cube_volume'

For more information, see Wrangle Language.

SOURCEROWNUMBER function generates null values consistently

The SOURCEROWNUMBER function returns the row number of the row as it appears in the original dataset. After some operations, such as unions, joins, and aggregations, this row information is no longer available.

In Release 5.0.1 and earlier, the results were confusing. When source row information was not available, the function was simply not available for use.

In Release 5.1 and later, the behavior of the SOURCEROWNUMBER function is more consistent:

  • If the source row information is available, it is returned.
  • If it is not available:
    • The function can still be used.
    • The function returns null values in all cases.

For more information, see SOURCEROWNUMBER Function.

New Functions

Function NameDescription
ARRAYELEMENTAT FunctionReturns element value of input array for the provided index value.
DOUBLEMETAPHONE FunctionReturns primary and secondary phonetic spellings of an input string using the Double Metaphone algorithm.
DOUBLEMETAPHONEEQUALS FunctionReturns true if two strings match phonetic spellings using Double Metaphone algorithm. Tolerance threshold can be adjusted.
UNIQUE FunctionGenerates a new column containing an array of the unique values from a source column.

Release 5.0.1

RAND function generates true random numbers

In Release 5.0 and earlier, the RAND function produced the same set of random numbers within the browser, after browser refresh, and over subsequent runs of a job. 

  • During job execution, a default seed value was inserted as the basis for the function during the execution of the job. 
  • In some cases, this behavior is desired. 

In Release 5.0.1 and later, the RAND function accepts an optional integer as a parameter. When this new seed value is inserted, the function generates deterministic, pseudo-random values.

  • This version matches the behavior of the old function.

    NOTE: On all upgraded instances of the platform, references to the RAND function have been converted to use a default seed value, so that previous behavior is maintained in the upgraded version.

  • If no seed value is inserted as a parameter, the RAND function generates true random values within the browser, after browser refresh, and over subsequent job runs.

    NOTE: Be aware that modifying your dataset based on the generated values of RAND() may have unpredictable effects later in your recipe and downstream of it.

For more information, see RAND Function.

Release 5.0

Required type parameter

Prior to Release 5.0, the following was a valid Wrangle step:

derive value:colA + colB as:'colC'

Beginning in Release 5.0, the type parameter is required. This parameter defines whether the transform is a single or multi-row formula. In the Transform Builder, this value must be specified.

The following is valid in Release 5.0:

derive type:single value:colA + colB as:'colC'

See Derive Transform.

See Transform Builder.

Deprecated aggregate transform

In Release 4.2.1 and earlier, the aggregate transform could be used to aggregate your datasets using aggregation functions and groupings. 

In Release 5.0 and later, this transform has been merged into the pivot transform. The aggregate transform has been deprecated and is no longer available. 

NOTE: During upgrade to Release 5.0 and later, recipes that had previously used the aggregate transform are automatically migrated to use the pivot equivalent.

Example 1

Release 4.2.1 and earlier Aggregate:

aggregate value:AVERAGE(Scores)

Release 5.0 and later Pivot:

pivot value: AVERAGE(Score) limit: 1

The limit parameter defines the maximum number of columns that can be generated by the pivot.

Example 2

Aggregate:

aggregate value:AVERAGE(Scores) group:studentId

Pivot:

pivot group: StudentId value: AVERAGE(Score) limit: 1

For more information, see Pivot Transform.

New search terms

In the new Search panel, you can search for terms that can be used to select transformations for quick population of parameters. In the following table, you can see Wrangle how terminology has changed in Release 5.0 for some common transforms from earlier release. 

Tip: You can paste the Release 5.0 terms in the Search panel to locate the same transformations used in earlier releases.

Release 4.2.1 and earlier transformsRelease 5.0 and later search terms

aggregate

pivot
keepfilter
deletefilter
extract on:extractpatterns
extract at:extractpositions
extract before:extractbetweendelimiters
extract after:extractbetweendelimiters
replace on:replacepatterns
replace at:replacepositions
replace before:replacebetweenpatterns
replace after:replacebetweenpatterns
replace from:replacebetweenpatterns
replace to:replacebetweenpatterns
split on:splitpatterns
split delimiters:splitpositions
split every:splitpositions
split positions:splitpositions
split after:splitpatterns
split before:splitpatterns
split from:splitpatterns
split to:splitpatterns

Support for <> operator

Prior to Release 5.0, the following operator was used to test "not equal" comparisons:

!=

Beginning in Release 5.0, the following operators is also supported:

<>

Example:

derive value:IF ((col1 <> col2), 'different','equal') as:'testNotEqual'

Tip: Both of the above operators are supported, although the <> operator is preferred.

For more information, see Comparison Operators.

ROUND function takes optional number of digits

The ROUND function now supports rounding to a specified number of digits. By default, values are rounded to the nearest integer, as before. See ROUND Function.

New Functions

Function NameDescription
DEGREES FunctionGenerates the value in degrees for an input radians value.
EXACT FunctionCompares two strings to see if they are exact matches.
FILTEROBJECT FunctionFilters the keys and values from an Object based on specified keys.
HOST FunctionReturns the host value from a URL.
ISEVEN FunctionReturns true if an Integer, function returning an Integer, or a column contains an even value.
ISODD FunctionReturns true if an Integer, function returning an Integer, or a column contains an odd value.
KTHLARGESTUNIQUE FunctionComputes the kth-ranked unique value in a set of values.
LCM FunctionReturns the least common multiple between two input values.
MODE FunctionComputes the mode (most common) value for a set of values.
MODEIF FunctionComputes the mode based on a conditional test.
PAD FunctionPads the left or right side of a value with a specified character string.
PI FunctionGenerates the value for pi to 15 decimal places.
RADIANS FunctionGenerates the value in radians for an input degrees value.
RANDBETWEEN FunctionGenerates a random Integer in a range between two specified values.
RIGHTFIND Function Locates a substring by searching from the right side of an input value.
ROLLINGCOUNTA FunctionComputes count of non-null values across a rolling window within a column.
ROLLINGKTHLARGEST FunctionComputes the kth largest value across a rolling window within a column.
ROLLINGKTHLARGESTUNIQUE FunctionComputes the kth largest unique value across a rolling window within a column.
ROLLINGLIST FunctionComputes list of all values across a rolling window within a column.
ROLLINGMAX FunctionComputes maximum value across a rolling window within a column.
ROLLINGMIN FunctionComputes minimum value across a rolling window within a column.
ROLLINGMODE FunctionComputes mode (most common) value across a rolling window within a column.
ROLLINGSTDEV FunctionComputes standard deviation across a rolling window within a column.
ROLLINGVAR FunctionComputes variance across a rolling window within a column.
SIGN FunctionComputes the positive or negative sign of an input value.
TRUNC FunctionTruncates a value to the nearest integer or a specified number of digits.
URLPARAMS FunctionExtracts any query parameters from a URL into an Object.
WEEKNUM FunctionCalculates the week that the date appears during the year (1-52).

Release 4.2.1

None.

Release 4.2

New Filter transform

Perform a variety of predefined row filtrations using the new filter transform, or apply your own custom formula to keep or delete rows from your dataset. 

New Case transform

Beginning in Release 4.2, you can use the Transform Builder to simplify the construction of CASE statements. For each case, specify the conditional and resulting expression in separate textboxes.

Rename transform now supports multi-column rename

Use the rename transform to rename multiple columns in a single transform. 

Delete specified columns or delete the others

The drop transform now supports the option of deleting all columns except the ones specified in the transform. See Drop Transform.

New string comparison functions

Compare two strings using Latin collation settings. See below.

NOW function returns 24-hour time values

In Release 4.1.1 and earlier, the NOW function returned time values for the specified time zone in 12-hour time, which was confusing.

In Release 4.2 and later, this function returns values in 24-hour time. 

New Transforms

Transform NameDocumentation
caseCase Transform
filterFilter Transform

New Functions

Function NameDocumentation
STRINGGREATERTHAN

STRINGGREATERTHAN Function

STRINGGREATERTHANEQUAL

STRINGGREATERTHANEQUAL Function

STRINGLESSTHAN

STRINGLESSTHAN Function

STRINGLESSTHANEQUAL

STRINGLESSTHANEQUAL Function

SUBSTITUTESUBSTITUTE Function

This page has no comments.