API Workflow - Run Job

This section describes how to run a job using the APIs available in  Designer Cloud Enterprise Edition.

A note about API URLs:

In the listed examples, URLs are referenced in the following manner:

<protocol>://<platform_base_url>/

In your product, these map references map to the following:

<http or https>://<hostname>:<port_number>/

For more information, see API Reference.

Run Job Endpoints

Depending on the type of job that you are running, you must use one of the following endpoints:

Run job

Run a job to generate the outputs from a single recipe in a flow.

Run flow

Run all outputs specified in a flow. Optionally, you can run all scheduled outputs. 

Run deployment

Run the primary flow in the active release of the specified deployment.

Deployments are available only through the Deployment Manager. For more information, see Overview of Deployment Manager.

Pre-requisites

Before you begin, you should verify the following:

1. Get authentication credentials. As part of each request, you must pass in authentication credentials to the platform. For more information, see Manage API Access Tokens.

   For more information, see  https://api.trifacta.com/ee/7.6/index.html#section/Authentication

2. Verify job execution. Run the desired job through the Designer Cloud application and verify that the output objects are properly generated.

3. Acquire recipe (wrangled dataset) identifier. In Flow View, click the icon for the recipe whose outputs you wish to generate. Acquire the numeric value for the recipe from the URL. In the following, the recipe Id is 28629:
   
   

   http://<platform_base_url>/flows/5479?recipe=28629&tab=recipe

4. Create output object. A recipe must have at least one output object created for it before you can run a job via APIs. For more information, see Flow View Page.

If you wish to apply overrides to the inputs or outputs of the recipe, you should acquire those identifiers or paths now. For more information, see "Run Job with Parameter Overrides" below.

Step - Run Job

Through the APIs, you can specify and run a job. To run a job with all default settings, construct a request like the following:

{
  "wrangledDataset": {
    "id": 28629
  }
}

{
    "sessionId": "79276c31-c58c-4e79-ae5e-fed1a25ebca1",
    "reason": "JobStarted",
    "jobGraph": {
        "vertices": [
            21,
            22
        ],
        "edges": [
            {
                "source": 21,
                "target": 22
            }
        ]
    },
    "id": 961247,
    "jobs": {
        "data": [
            {
                "id": 21
            },
            {
                "id": 22
            }
        ]
    }
}

If the 201 response code is returned, then the job has been queued for execution. 

For more information, see  https://api.trifacta.com/ee/7.6/index.html#operation/runJobGroup

Step - Monitoring Your Job

You can monitor the status of your job through the following endpoint:

{
    "id": 961247,
    "name": null,
    "description": null,
    "ranfrom": "ui",
    "ranfor": "recipe",
    "status": "Complete",
    "profilingEnabled": true,
    "runParameterReferenceDate": "2019-08-20T17:46:27.000Z",
    "createdAt": "2019-08-20T17:46:28.000Z",
    "updatedAt": "2019-08-20T17:53:17.000Z",
    "workspace": {
        "id": 22
    },
    "creator": {
        "id": 38
    },
    "updater": {
        "id": 38
    },
    "snapshot": {
        "id": 774476
    },
    "wrangledDataset": {
        "id": 28629
    },
    "flowRun": null
}

When the job has successfully completed, the returned status message includes the following:

"status": "Complete",

For more information, see  https://api.trifacta.com/ee/7.6/index.html#operation/getJobGroup

Step - Re-run Job

In the future, you can re-run the job using the same, simple request:

{
  "wrangledDataset": {
    "id": 28629
  }
}

The job is re-run as it was previously specified.

For more information, see  https://api.trifacta.com/ee/7.6/index.html#operation/createJobGroup

Step - Run Job with Overrides - Files

As needed, you can specify runtime overrides for any of the settings related to the job definition or its outputs. For file-based jobs, these overrides include:

• Data sources
• Execution environment
• profiling
• Output file, format, and other settings

Input file overrides

You can override the file-based data sources your job run. In the following example, two parameterized datasets are overridden with new files.

{
  "wrangledDataset": {
    "id": 28629
  },
  "overrides": {
    "datasources": {
      "airlines–2.csv parameterized": [
        "s3://my-new-bucket/test-override-input/airlines1.csv",
        "s3://my-new-bucket/test-override-input/airlines2.csv",
        "s3://my-new-bucket/test-override-input/airlines3.csv"
      ],
      "airlines–4.csv": [
        "s3://my-new-bucket/test-override-input/airlines1.csv",
        "s3://my-new-bucket/test-override-input/airlines2.csv"
      ]
    }
  }
}

The job specified for recipe 28629 is re-run using the new data sources.

Notes:

• You can use this API method to overwrite the bucket name for your source, which is not possible through standard parameterization. 
  • The parameterized list of files can be from different folders, too.
• File type and size information is not displayed in the Job Details page for these overridden jobs. 
• No validation is performed on the existence of these files prior to execution. If the files do not exist, the job fails.

For more information, see  https://api.trifacta.com/ee/7.6/index.html#operation/createJobGroup

Output file overrides

• See API Workflow - Manage Outputs.

• See https://api.trifacta.com/ee/7.6/index.html#operation/getWriteSetting

1. Acquire the internal identifier for the recipe for which you wish to execute a job. In the previous example, this identifier was 28629.

2. Construct a request using the following:

   Endpoint	<protocol>://<platform_base_url>/v4/jobGroups
   Authentication	Required
   Method	POST

   Request Body:

   {
     "wrangledDataset": {
       "id": 28629
     },
     "overrides": {
       "profiler": true,
       "execution": "spark",
       "writesettings": [
         {
           "path": "<new_path_to_output>",
           "format": "csv",
           "header": true,
           "asSingleFile": true
         }
       ]
     },
     "ranfrom": null
   }
   

3.  In the above example, the job has been launched with the following overrides:

   1. Job will be executed on the Spark cluster. Other supported values depend on your environment:

      Value for overrides.execution	Description
      photon	Running environment on Alteryx node
      spark	Spark on integrated cluster, with the following exceptions.
      databricksSpark	Spark on Azure Databricks
      emrSpark	Spark on AWS EMR

   2. Job will be executed with profiling enabled.
   3. Output is written to a new file path.
   4. Output format is CSV to the designated path. 
   5. Output has a header and is generated as a single file.

4. A response code of 201 - Created is returned. The response body should look like the following:

   {
   
       "sessionId": "79276c31-c58c-4e79-ae5e-fed1a25ebca1",
       "reason": "JobStarted",
       "jobGraph": {
           "vertices": [
               21,
               22
           ],
           "edges": [
               {
                   "source": 21,
                   "target": 22
               }
           ]
       },
       "id": 962221,
       "jobs": {
           "data": [
               {
                   "id": 21
               },
               {
                   "id": 22
               }
           ]
       }
   }

5. Retain the id value, which is the job identifier, for monitoring.

Step - Run Job with Overrides - Tables

You can also pass job definition overrides for table-based outputs. For table outputs, overrides include:

• Path to database to which to write (must have write access)

• Connection to write to the target.

  Tip: This identifier is for the connection used to write to the target system. This connection must already exist. For more information on how to retrieve the identifier for a connection, see

  https://api.trifacta.com/ee/7.6/index.html#operation/listConnections

• Name of output table

• Target table type

  Tip: You can acquire the target type from the vendor value in the connection response. For more information, see

  https://api.trifacta.com/ee/7.6/index.html#operation/listConnections

• action:

  Key value	Description
  create	Create a new table with each publication.
  createAndLoad	Append your data to the table.
  truncateAndLoad	Truncate the table and load it with your data.
  dropAndLoad	Drop the table and write the new table in its place.

• Identifier of connection to use to write data.

• See API Workflow - Manage Outputs.

• See https://api.trifacta.com/ee/7.6/index.html#operation/getPublication

1. Acquire the internal identifier for the recipe for which you wish to execute a job. In the previous example, this identifier was 28629.

2. Construct a request using the following:

   Endpoint	<protocol>://<platform_base_url>/v4/jobGroups
   Authentication	Required
   Method	POST

   Request Body:

   {
     "wrangledDataset": {
       "id": 28629
     },
     "overrides": {
       "publications": [
         {
           "path": [
             "prod_db"
           ],
           "tableName": "Table_CaseFctn2",
           "action": "createAndLoad",
           "targetType": "postgres",
           "connectionId": 3,
         }
       ]
     },
     "ranfrom": null
   }
   

3.  In the above example, the job has been launched with the following overrides:

   NOTE: When overrides are applied to publishing, any publications that are already attached to the recipe are ignored.

   1. Output path is to the prod_db database, using table name is Table_CaseFctn2.
   2. Output action is "create and load." See above for definitions. 
   3. Target table type is a PostgreSQL table.

4. A response code of 201 - Created is returned. The response body should look like the following:

   {
   
   
       "sessionId": "79276c31-c58c-4e79-ae5e-fed1a25ebca1",
       "reason": "JobStarted",
       "jobGraph": {
           "vertices": [
               21,
               22
           ],
           "edges": [
               {
                   "source": 21,
                   "target": 22
               }
           ]
       },
       "id": 962222,
       "jobs": {
           "data": [
               {
                   "id": 21
               },
               {
                   "id": 22
               }
           ]
       }
   }

5. Retain the id value, which is the job identifier, for monitoring.

Step - Run Job with Overrides - Webhooks

When you execute a job, you can pass in a set of parameters as overrides to generate a webhook message to a third-party application, based on the success or failure of the job.

For more information on webhooks, see Create Flow Webhook Task.

1. Acquire the internal identifier for the recipe for which you wish to execute a job. In the previous example, this identifier was 28629.

2. Construct a request using the following:

   Endpoint	<protocol>://<platform_base_url>/v4/jobGroups
   Authentication	Required
   Method	POST

   Request Body:
   
   

   {
     "wrangledDataset": {
       "id": 28629
     },
     "overrides": {
       "webhooks": [{
         "name": "webhook override",
         "url": "http://example.com",
         "method": "post",
         "triggerEvent": "onJobFailure",
         "body": {
           "text": "override" 
          },
         "headers": {
           "testHeader": "val1" 
          },
         "sslVerification": true,
         "secretKey": "123"
     }]
    }
   }

3.  In the above example, the job has been launched with the following overrides:
   
   

   Override setting	Description
   name	Name of the webhook.
   url	URL to which to send the webhook message.
   method	The HTTP method to use. Supported values: POST, PUT, PATCH, GET, or DELETE. Body is ignored for GET and DELETE methods.
   triggerEvent	Supported values: onJobFailure - send webhook message if job fails onJobSuccess - send webhook message if job completes successfully onJobDone - send webhook message when job fails or finishes successfully
   body	(optional) The value of the text field is the message that is sent. NOTE: Some special token values are supported. See Create Flow Webhook Task.
   header	(optional) Key-value pairs of headers to include in the HTTP request.
   sslVerification	(optional) Set to true if SSL verification should be completed. If not specified, the value is true.
   secretKey	(optional) If enabled, this value should be set to the secret key to use.

4. A response code of 201 - Created is returned. The response body should look like the following:

   {
   
   
       "sessionId": "79276c31-c58c-4e79-ae5e-fed1a25ebca1",
       "reason": "JobStarted",
       "jobGraph": {
           "vertices": [
               21,
               22
           ],
           "edges": [
               {
                   "source": 21,
                   "target": 22
               }
           ]
       },
       "id": 962222,
       "jobs": {
           "data": [
               {
                   "id": 21
               },
               {
                   "id": 22
               }
           ]
       }
   }

5. Retain the id value, which is the job identifier, for monitoring.

Step - Run Job with Parameter Overrides

You can pass overrides of the default parameter values as part of the job definition. You can use the following mechanism to pass in parameter overrides of the following types:

• Datasets with parameters (variable type)
• Output object parameters
• Flow parameters

The syntax is the same for each type.

1. Acquire the internal identifier for the recipe for which you wish to execute a job. In the previous example, this identifier was 28629.
2. Construct a request using the following:

    

   Endpoint	<protocol>://<platform_base_url>/v4/jobGroups
   Authentication	Required
   Method	POST

   Request Body:

   {
     "wrangledDataset": {
       "id": 28629
     },
     "overrides": {
       "runParameters": {
         "overrides": {
           "data": [
             {
               "key": "varRegion",
               "value": "02"
             }
           ]
         }
       }
     },
     "ranfrom": null
   }

3.  In the above example, the specified job has been launched for recipe 28629. The run parameter varRegion has been set to 02 for this specific job. Depending on how it's defined in the flow, this parameter could influence change either of the following:
   1. The source for the imported dataset. 
   2. The path for the generated output.
   3. A flow parameter reference in the recipe
   4. For more information, see Overview of Parameterization. 

4. A response code of 201 - Created is returned. The response body should look like the following:

   {
       "sessionId": "79276c31-c58c-4e79-ae5e-fed1a25ebca1",
       "reason": "JobStarted",
       "jobGraph": {
           "vertices": [
               21,
               22
           ],
           "edges": [
               {
                   "source": 21,
                   "target": 22
               }
           ]
       },
       "id": 962223,
       "jobs": {
           "data": [
               {
                   "id": 21
               },
               {
                   "id": 22
               }
           ]
       }
   }

5. Retain the id value, which is the job identifier, for monitoring.

Step - Spark Job Overrides

When it is enabled, you can submit overrides to a specific set of Spark properties for your job.

This feature and the Spark properties to override must be enabled. For more information on enabling this feature, see Enable Spark Job Overrides.

The following example, shows how to run a job for a specified recipe with Spark property overrides applied to it. This example assumes that the job has already been configured to be executed on Spark ("execution": "spark"):

Request Body:

{
  "wrangledDataset": {
    "id": 28629
  },
  "sparkOptions": [
    {
      "key": "spark.executor.cores",
      "value": "2"
    },
    {
      "key": "spark.executor.memory",
      "value": "4GB"
    }
  ]
}